To upgrade your Manhattan receiver, please follow these instructions:

Important - disconnect the power to the receiver from the wall socket. Only connect the power when instructed to do so

1. Download the new software to your desktop, unzip to a new folder (eg 'UPGRADE').

2. Connect the receiver to the computer using a NULL MODEM cable.

3. Open the new folder and double click '' Upgradew'' executable file. A DOS window will appear on your computer screen indicating it's readiness to commence the download.

4. At this point you must connect the power to the receiver. The downloading process will begin automatically and the LCD front panel display on the receiver will start counting down with file number 2019, 1019, 2018, 1018 etc. When the process is complete, the DOS window on your computer screen will disappear and the LCD front panel display on your receiver will flash ''8888''

5. Disconnect the NULL MODEM cable and the mains power to the receiver. Reconnect your receiver to TV and switch on the receiver.

6. After switching on the receiver select ''SYSTEM SETTING'' and go to ''FACTORY DEFAULT SETTING'' and press OK button twice. This will reset the memory to the new software values.

7. After ''FACTORY DEFAULT'' has been activated the receiver can now be reconfigured by the user appropriately.

NB All software upgrades are carried out AT YOUR OWN RISK. Damage to receivers caused by incorrect upgrades CANNOT be the responsibility of Manhattan. Your statuatory rights are not affected.